The flow you need depends on how much oil circulates, and therefore on displacement. Give us one or the other.
Each model handles a different oil flow. Spinner II asks that the whole sump volume pass through the centrifuge five to ten times per hour. Enter your sump volume and the range you need appears on the scale.
Past 16 gpm, units are installed in parallel — 60 gpm setups and larger exist.
The same list the tool above uses, in plain sight. The flow shown is what the engine needs; the model suggested is the smallest one that covers it.
| Engine | Displacement | Flow needed | Model that fits |
|---|---|---|---|
| Caterpillar 3116/3126 | 6.6 L | 1.0 gpm | 560 HE |
| Caterpillar C7 | 7.2 L | 1.0 gpm | 560 HE |
| Caterpillar C9 | 9.3 L | 1.0 gpm | 560 HE |
| Caterpillar 3176 | 10.3 L | 2.0 gpm | 576 HE · 596 HE · 996 |
| Caterpillar C10 | 10.3 L | 2.0 gpm | 576 HE · 596 HE · 996 |
| Caterpillar C12 | 10.3 L | 2.0 gpm | 576 HE · 596 HE · 996 |
| Caterpillar 3208 | 10.4 L | 2.0 gpm | 576 HE · 596 HE · 996 |
| Caterpillar 3306B | 10.5 L | 2.0 gpm | 576 HE · 596 HE · 996 |
| Caterpillar C13 | 12.5 L | 2.0 gpm | 576 HE · 596 HE · 996 |
| Caterpillar 3406B,C&E | 14.6 L | 2.0 gpm | 576 HE · 596 HE · 996 |
| Caterpillar C15/16 | 15.2 L | 2.0 gpm | 576 HE · 596 HE · 996 |
| Engine | Displacement | Flow needed | Model that fits |
|---|---|---|---|
| Cummins 4B3.9 | 3.9 L | 1.0 gpm | 560 HE |
| Cummins 6B5.9 | 5.9 L | 1.0 gpm | 560 HE |
| Cummins 6C8.3 | 8.3 L | 1.0 gpm | 560 HE |
| Cummins ISC | 8.3 L | 2.0 gpm | 576 HE · 596 HE · 996 |
| Cummins L10 | 10.0 L | 2.0 gpm | 576 HE · 596 HE · 996 |
| Cummins ISM | 11.0 L | 2.0 gpm | 576 HE · 596 HE · 996 |
| Cummins M11 | 11.0 L | 2.0 gpm | 576 HE · 596 HE · 996 |
| Cummins N14 | 14.0 L | 2.0 gpm | 576 HE · 596 HE · 996 |
| Cummins N14 CELECT | 14.0 L | 2.0 gpm | 576 HE · 596 HE · 996 |
| Cummins NA, NH | 14.0 L | 2.0 gpm | 576 HE · 596 HE · 996 |
| Cummins NTC BC I & II | 14.0 L | 2.0 gpm | 576 HE · 596 HE · 996 |
| Cummins NTC BC III & IV | 14.0 L | 2.0 gpm | 576 HE · 596 HE · 996 |
| Engine | Displacement | Flow needed | Model that fits |
|---|---|---|---|
| Detroit Diesel DDC 6 - 71 | 7.0 L | 2.0 gpm | 576 HE · 596 HE · 996 |
| Detroit Diesel DDC 6 or 8V71 | 7.0 L | 2.0 gpm | 576 HE · 596 HE · 996 |
| Detroit Diesel DDC 8.2L | 8.2 L | 2.0 gpm | 576 HE · 596 HE · 996 |
| Detroit Diesel DDC Series 50 | 8.5 L | 2.0 gpm | 576 HE · 596 HE · 996 |
| Detroit Diesel DDC 6V & 8V92 | 9.0 L | 2.0 gpm | 576 HE · 596 HE · 996 |
| Detroit Diesel DDC Series 60 | 11.1 L | 2.0 gpm | 576 HE · 596 HE · 996 |
| Detroit Diesel DD13 | 12.8 L | 2.0 gpm | 576 HE · 596 HE · 996 |
| Detroit Diesel DD15 | 14.8 L | 2.0 gpm | 576 HE · 596 HE · 996 |
| Detroit Diesel DD16 | 15.6 L | 2.0 gpm | 576 HE · 596 HE · 996 |
| Engine | Displacement | Flow needed | Model that fits |
|---|---|---|---|
| Ford Ford 1060 | 5.9 L | 1.0 gpm | 560 HE |
| Ford Ford 6.6L | 6.6 L | 2.0 gpm | 576 HE · 596 HE · 996 |
| Ford Ford 7.8L | 7.8 L | 2.0 gpm | 576 HE · 596 HE · 996 |
| Ford Ford 1460 | 8.3 L | 1.0 gpm | 560 HE |
| Engine | Displacement | Flow needed | Model that fits |
|---|---|---|---|
| Mack E6-250 & others | 11.0 L | 2.0 gpm | 576 HE · 596 HE · 996 |
| Mack E7-350 & others | 12.0 L | 2.0 gpm | 576 HE · 596 HE · 996 |
| Engine | Displacement | Flow needed | Model that fits |
|---|---|---|---|
| Mercedes-Benz OM366 | 6.0 L | 1.0 gpm | 560 HE |
| Engine | Displacement | Flow needed | Model that fits |
|---|---|---|---|
| Navistar DT 360 | 5.9 L | 1.0 gpm | 560 HE |
| Navistar DT 408 | 6.7 L | 1.0 gpm | 560 HE |
| Navistar Int'l 6.9L | 6.9 L | 1.0 gpm | 560 HE |
| Navistar Int'l 7.3L | 7.3 L | 1.0 gpm | 560 HE |
| Navistar DT 466 | 7.6 L | 1.0 gpm | 560 HE |
| Navistar 530 | 8.7 L | 1.0 gpm | 560 HE |
| Engine | Displacement | Flow needed | Model that fits |
|---|---|---|---|
| Volvo VE12 | 12.0 L | 2.0 gpm | 576 HE · 596 HE · 996 |